A. Walsh, D. Cóstola, and L. C. Labaki, Comparison of three climatic zoning methodologies for building energy efficiency applications, Energy and Buildings, vol.146, pp.111-121, 2017.

J. Khambadkone-naveen-kishore and . Rekha, A bioclimatic approach to develop spatial zoning maps for comfort, passive heating and cooling strategies within a composite zone of india, Building and Environment, vol.128, pp.190-215, 2018.

A. Hassaan and A. Mahmoud, An analysis of bioclimatic zones and implications for design of outdoor built environments in egypt, Building and Environment, vol.46, issue.3, pp.605-620, 2011.

, World energy outlook

N. M. Qi-jie-kwong, B. B. Adam, and . Sahari, Thermal comfort assessment and potential for energy efficiency enhancement in modern tropical buildings: A review, Energy and Buildings, vol.68, pp.547-557, 2014.

. Ministère-de-l'energie, . Des-hydrocarbures, I. Madagascar, . Bilan, and . National, , 2017.

S. Sorrell, Reducing energy demand: A review of issues, challenges and approaches. Renewable and Sustainable Energy Reviews, vol.47, pp.74-82, 2015.

F. Alrashed and M. Asif, Climatic classifications of saudi arabia for building energy modelling, Energy Procedia, vol.75, pp.1425-1430, 2015.

J. Almorox, H. Victor, P. Quej, and . Martí, Global performance ranking of temperature-based approaches for evapotranspiration estimation considering köppen climate classes, Journal of Hydrology, vol.528, pp.514-522, 2015.

M. C. Peel, B. L. Finlayson, and T. A. Mcmahon, Updated world map of the kà ¶ppen-geiger climate classification, Hydrology and Earth System Sciences, vol.11, issue.5, pp.1633-1644, 2007.

X. Dai and P. Wang, A new classification of large-scale climate regimes around the tibetan plateau based on seasonal circulation patterns, Advances in Climate Change Research, vol.8, pp.26-36, 2017.

D. Chen and H. Chen, Using the köppen classification to quantify climate variation and change: An example for 1901-2010, Environmental Development, vol.6, pp.69-79, 2013.

M. Kottek, J. Grieser, C. Beck, B. Rudolf, and F. Rubel, World map of the köppen-geiger climate classification updated, Meteorologische Zeitschrift, vol.15, issue.3, pp.259-263, 2006.

H. W. Danny, L. Li, J. C. Yang, and . Lam, Impact of climate change on energy use in the built environment in different climate zones -a review, Energy, vol.42, issue.1, pp.103-112, 2012.

J. C. Lam, K. K. Wan, S. L. Wong, and T. N. Lam, Long-term trends of heat stress and energy use implications in subtropical climates, Applied Energy, vol.87, issue.2, pp.608-612, 2010.

J. Zscheischler, M. D. Mahecha, and S. Harmeling, Climate classifications: the value of unsupervised clustering, Procedia Computer Science, vol.9, pp.897-906, 2012.

R. Falquina and C. Gallardo, Development and application of a technique for projecting novel and disappearing climates using cluster analysis, Atmospheric Research, vol.197, pp.224-231, 2017.

J. Pra?nikar, Particulate matter time-series and köppen-geiger climate classes in north america and europe, Atmospheric Environment, vol.150, pp.136-145, 2017.

O. P. Eveno-maëlle, O. Johan, V. Dubreuil, and H. Quénol, Variabilité et changement climatique en France de 1951à 2010 : analyse au moyen de la classification de Köppen et des " types de climats annuels, Climatologie, vol.13, pp.47-70, 2016.

O. Rakoto-joseph, F. Garde, M. David, L. Adelard, and Z. A. Randriamanantany, Development of climatic zones and passive solar design in madagascar, Energy Conversion and Management, vol.50, issue.4, pp.1004-1010, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00919556

H. Djamila and Y. Tay-lee, A study of köppen-geiger system for comfort temperature prediction in melbourne city, Sustainable Cities and Society, vol.27, pp.42-48, 2016.

S. Attia, T. Lacombe, T. Hery, F. Rakotondramiarana, G. Garde et al., Analysis tool for bioclimatic design strategies in hot humid climates, Sustainable Cities and Society, vol.45, pp.8-24, 2019.

Y. Balslev, O. Potchter, and A. Matzarakis, Climatic and thermal comfort analysis of the tel-aviv geddes plan: A historical perspective, Building and Environment, vol.93, pp.302-318, 2015.

R. Kotharkar and A. Bagade, Local climate zone classification for indian cities: A case study of nagpur, vol.24, pp.369-392, 2018.

N. G. Perera and R. Emmanuel, A "local climate zone" based approach to urban planning in colombo, sri lanka, vol.23, pp.188-203, 2018.

X. Yang, L. Yao, T. Jin, L. L. Peng, Z. Jiang et al., Assessing the thermal behavior of different local climate zones in the nanjing metropolis, china. Building and Environment, vol.137, pp.171-184, 2018.

J. Jacobeit, Classifications in climate research, Physics and Chemistry of the Earth, vol.35, issue.9, pp.411-421, 2010.

K. W. Kevin, . Wan, H. W. Danny, L. Li, J. C. Yang et al., Climate classifications and building energy use implications in china, Energy and Buildings, vol.42, issue.9, pp.1463-1471, 2010.

S. L. Wong, K. K. Wan, L. Yang, and J. C. Lam, Changes in bioclimates in different climates around the world and implications for the built environment, Building and Environment, vol.57, pp.214-222, 2012.

Á. Arroyo, Á. Herrero, V. Tricio, and E. Corchado, Analysis of meteorological conditions in spain by means of clustering techniques, Journal of Applied Logic, vol.24, pp.76-89, 2017.

W. Lee and C. Kung, Using climate classification to evaluate building energy performance, Energy, vol.36, issue.3, pp.1797-1801, 2011.

A. Walsh, D. Cóstola, and L. C. Labaki, Review of methods for climatic zoning for building energy efficiency programs, Building and Environment, vol.112, pp.337-350, 2017.

A. Walsh, D. Cóstola, and L. C. Labaki, Performance-based validation of climatic zoning for building energy efficiency applications, Applied Energy, vol.212, pp.416-427, 2018.

C. S. Chris, J. C. Lau, L. Lam, and . Yang, Climate classification and passive solar design implications in china, Energy Conversion and Management, vol.48, issue.7, pp.2006-2015, 2007.

J. C. Lam, L. Yang, and J. Liu, Development of passive design zones in china using bioclimatic approach. Energy Conversion and Management, vol.47, pp.746-762, 2006.

H. Werner and . Terjung, Physiologic climates of the conterminous united states : A bioclimatic classification based on man, Annals of the Association of American Geographers, vol.56, issue.1, pp.141-179, 1966.

K. Verichev and M. Carpio, Climatic zoning for building construction in a temperate climate of chile, Sustainable Cities and Society, vol.40, pp.352-364, 2018.

J. I. Prieto, J. C. Martínez-garcía, and D. García, Correlation between global solar irradiation and air temperature in asturias, spain. Solar Energy, vol.83, issue.7, pp.1076-1085, 2009.

A. Kassambara, Practical Guide To Principal Component Methods in R (Multivariate Analysis Book 2), 2017.

S. Sharma, Applied multivariate techniques, 1995.

L. Bor?vka, O. Vacek, and J. Jehli?ka, Principal component analysis as a tool to indicate the origin of potentially toxic elements in soils, Geoderma, vol.128, issue.3-4, pp.289-300, 2005.

F. Murtagh and P. Legendre, Ward's hierarchical agglomerative clustering method: Which algorithms implement ward's criterion?, Journal of Classification, vol.31, issue.3, pp.274-295, 2014.

S. Lê, J. Josse, and F. Husson, FactoMineR: AnRPackage for multivariate analysis, Journal of Statistical Software, vol.25, issue.1, 2008.

F. Husson, S. Le, and J. Pagès, Exploratory Multivariate Analysis by Example Using R (Chapman & Hall/CRC Computer Science & Data Analysis), 2010.

P. Bosser, Ouvrage Ecole Nationale des Sciences Géographiques, 2012.

A. Drouin and D. Saint-laurent, Comparaison des méthodes d'interpolation pour l'é laboration de modèles numé riques d'é lé vation de haute pré cision dans la repré sentation micro-topographique des plaines inondables, Hydrological Sciences Journal, vol.55, issue.4, pp.526-539, 2010.

J. Mccoy and K. Johnston, Using arcgis spatial analyst: Gis by esri -environmental systems research institute, 2001.

M. Patrick, C. P. Bartier, and . Keller, Multivariate interpolation to incorporate thematic surface data using inverse distance weighting (IDW), Computers & Geosciences, vol.22, issue.7, pp.795-799, 1996.

D. Hou, O. David, P. Connor, L. Nathanail, Y. Tian et al., Integrated GIS and multivariate statistical analysis for regional scale assessment of heavy metal soil contamination: A critical review, Environmental Pollution, vol.231, pp.1188-1200, 2017.

A. Júnior, S. R. Lucas-de-souza, E. Pai, B. T. Rodrigues, and V. Souza, Aurora: Mobile application for analysis of spatial variability of thermal comfort indexes of animals and people, using IDW interpolation, Computers and Electronics in Agriculture, vol.157, pp.98-101, 2019.

J. Li and A. D. Heap, Spatial interpolation methods applied in the environmental sciences: A review. Environmental Modelling & Software, vol.53, pp.173-189, 2014.

A. Kravchenko and D. G. Bullock, A comparative study of interpolation methods for mapping soil properties, Agronomy Journal, vol.91, issue.3, p.393, 1999.

B. Drury, L. K. Crawley, C. O. Lawrie, F. C. Pedersen, and . Winkelmann, Energy plus: energy simulation program, ASHRAE journal, vol.42, issue.4, pp.49-56, 2000.

C. Buratti, . Moretti, F. Belloni, and . Cotana, Unsteady simulation of energy performance and thermal comfort in non-residential buildings, Building and Environment, vol.59, pp.482-491, 2013.

R. Hwang and S. Shu, Building envelope regulations on thermal comfort in glass facade buildings and energy-saving potential for pmv-based comfort control, Building and Environment, vol.46, issue.4, pp.824-834, 2011.

J. Zhao, K. Lam, E. Ydstie, and V. Loftness, Occupant-oriented mixed-mode energyplus predictive control simulation, Energy and Buildings, vol.117, pp.362-371, 2016.

M. Tlijani, Thermo-physical caracterisation of bio-insulated materials : application to wood palm, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01618318

, Refrigerating American Society of Heating and Air Conditioning Engineers. ASHRAE Standard 55-2017 -Thermal Environmental Conditions for Human Occupancy, Ashrae Standards, vol.55, 2013.

, AP.671130_TMYx.epw Elevation: 10 m Table A.5: Weather files used for the application