J. Alexandersen, C. S. Andreasen, N. Aage, B. S. Lazarov, and O. Sigmund, Topology optimisation for coupled convection problems, 10th world Congress on structural and multidisciplinary optimization, pp.19-24, 2013.

J. Alexandersen, N. Aage, C. S. Andreasen, and O. Sigmund, Topology optimisation for natural convection problems, International Journal for Numerical Methods in Fluids, vol.76, issue.10, pp.699-721, 2014.

J. Alexandersen, O. Sigmund, and N. Aage, Topology optimisation of passive coolers for lightemitting diode lamps, 11th World Congress on Structural and Multidisciplinary Optimization, 2015.

J. Alexandersen, O. Sigmund, and N. Aage, Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection, International Journal of Heat and Mass Transfer, vol.100, pp.876-891, 2016.

J. Alexandersen, O. Sigmund, K. E. Meyer, and B. S. Lazarov, Design of passive coolers for lightemitting diode lamps using topology optimisation, International Journal of Heat and Mass Transfer, vol.122, pp.138-149, 2018.

J. Asmussen, J. Alexandersen, O. Sigmund, and C. S. Andreasen, A" poor man's" approach to topology optimization of natural convection problems, 2018.

T. W. Athan and P. Y. Papalambros, A note on weighted criteria methods for compromise solutions in multi-objective optimization, 1996.

W. Aung, Fully developed laminar free convection between vertical plates heated asymmetrically, International Journal of Heat and Mass Transfer, vol.15, issue.8, pp.1577-1580, 1972.

W. Aung, L. Fletcher, and V. Sernas, Developing laminar free convection between vertical flat plates with asymmetric heating, International Journal of Heat and Mass Transfer, vol.15, issue.11, pp.2293-2308, 1972.

A. Bar-cohen and W. Rohsenow, Thermally optimum spacing of vertical, natural convection cooled, parallel plates, Journal of heat transfer, vol.106, issue.1, pp.116-123, 1984.

A. Bastide, P. H. Cocquet, and D. Ramalingom, Penalization model for navier-stokesdarcy equation with application to porosityoriented topology optimization, Mathematical Models and Methods in Applied Sciences, 2018.

M. P. Bendsøe and N. Kikuchi, Generating optimal topologies in structural design using a homogenization method, Computer methods in applied mechanics and engineering, vol.71, issue.2, pp.197-224, 1988.

J. Bodoia and J. Osterle, The development of free convection between heated vertical plates, Journal of Heat Transfer, vol.84, issue.1, pp.40-43, 1962.

T. Borrvall and J. Petersson, Topology optimization of fluids in stokes flow, International journal for numerical methods in fluids, vol.41, issue.1, pp.77-107, 2003.

B. Brangeon, P. Joubert, and A. Bastide, Influence of the dynamic boundary conditions on natural convection in an asymmetrically heated channel, International Journal of Thermal Sciences, vol.95, pp.64-72, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01152398

T. Bruns, A reevaluation of the simp method with filtering and an alternative formulation for solid-void topology optimization. Structural and Multidisciplinary Optimization, vol.30, pp.428-436, 2005.

T. E. Bruns, Topology optimization of convection-dominated, steady-state heat transfer problems, International Journal of Heat and Mass Transfer, vol.50, pp.2859-2873, 2007.

P. Coffin and K. Maute, Level set topology optimization of cooling and heating devices using a simplified convection model. Structural and multidisciplinary optimization, vol.53, pp.985-1003, 2016.

T. Dbouk, A review about the engineering design of optimal heat transfer systems using topology optimization, Applied Thermal Engineering, vol.112, pp.841-854, 2017.

E. M. Dede, Multiphysics topology optimization of heat transfer and fluid flow systems, proceedings of the COMSOL Users Conference, 2009.

G. Desrayaud and G. Lauriat, Flow reversal of laminar mixed convection in the entry region of symmetrically heated, vertical plate channels, International Journal of Thermal Sciences, vol.48, issue.11, pp.2036-2045, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00750521

G. Desrayaud, E. Chénier, A. Joulin, A. Bastide, B. Brangeon et al., Benchmark solutions for natural convection flows in vertical channels submitted to different open boundary conditions, International journal of thermal sciences, vol.72, pp.18-33, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00841302

W. Elenbaas, Heat dissipation of parallel plates by free convection, Physica, vol.9, issue.1, pp.1-28, 1942.

H. A. Eschenauer and N. Olhoff, Topology optimization of continuum structures: a review, Applied Mechanics Reviews, vol.54, issue.4, pp.331-390, 2001.

, A tensorial approach to computational continuum mechanics using object-oriented techniques, Computers in physics, vol.12, pp.620-631, 1998.

I. Everett, Generalized Lagrange multiplier method for solving problems of optimum allocation of resources, Operations research, vol.11, issue.3, pp.399-417, 1963.

S. Goeke and O. Wünsch, Adjoint based topology optimization of conjugate heat transfer systems, PAMM, vol.17, issue.1, pp.771-772, 2017.

J. K. Guest, J. H. Prévost, and T. Belytschko, Achieving minimum length scale in topology optimization using nodal design variables and projection functions, International journal for numerical methods in engineering, vol.61, issue.2, pp.238-254, 2004.

J. H. Haertel and G. F. Nellis, A fully developed flow thermofluid model for topology optimization of 3d-printed air-cooled heat exchangers, Applied Thermal Engineering, vol.119, pp.10-24, 2017.

J. Haertel, K. Engelbrecht, B. S. Lazarov, and O. Sigmund, Topology optimization of thermal heat sinks, Proc. of the 2015 COMSOL Conference, 2015.

B. Hassani and E. Hinton, A review of homogenization and topology opimization iianalytical and numerical solution of homogenization equations, Computers & structures, vol.69, issue.6, pp.719-738, 1998.

B. Hassani and E. Hinton, A review of homogenization and topology optimization iiitopology optimization using optimality criteria, Computers & structures, vol.69, issue.6, pp.739-756, 1998.

B. Hassani and E. Hinton, A review of homogenization and topology optimization ihomogenization theory for media with periodic structure, Computers & Structures, vol.69, issue.6, pp.707-717, 1998.

Y. Joo, I. Lee, and S. J. Kim, Topology optimization of heat sinks in natural convection considering the effect of shape-dependent heat transfer coefficient, International Journal of Heat and Mass Transfer, vol.109, pp.123-133, 2017.

A. A. Koga, E. Lopes, H. Nova, C. R. De-lima, and E. Silva, Development of heat sink device by using topology optimization, International Journal of Heat and Mass Transfer, vol.64, pp.759-772, 2013.

E. Kontoleontos, E. Papoutsis-kiachagias, A. Zymaris, D. Papadimitriou, and K. Giannakoglou, , 2013.

, Adjoint-based constrained topology optimization for viscous flows, including heat transfer, Engineering Optimization, vol.45, issue.8, pp.941-961

S. Kreissl and K. Maute, Levelset based fluid topology optimization using the extended finite element method, Structural and Multidisciplinary Optimization, vol.46, issue.3, pp.311-326, 2012.

B. S. Lazarov and O. Sigmund, Filters in topology optimization based on helmholtz-type differential equations, International Journal for Numerical Methods in Engineering, vol.86, issue.6, pp.765-781, 2011.

K. Lee, Topology optimization of convective cooling system designs, 2012.

T. Lei, J. Alexandersen, B. S. Lazarov, F. Wang, J. H. Haertel et al., Investment casting and experimental testing of heat sinks designed by topology optimization, International Journal of Heat and Mass Transfer, vol.127, pp.396-412, 2018.

R. Li, M. Bousetta, E. Chénier, and G. Lauriat, Effect of surface radiation on natural convective flows and onset of flow reversal in asymmetrically heated vertical channels, International journal of thermal sciences, vol.65, pp.9-27, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00764760

Q. Q. Liang, Performance-based optimization: a review, Advances in Structural Engineering, vol.10, issue.6, pp.739-753, 2007.

D. K. Lim, Y. Park, H. Kim, and E. S. Kim, Cfd-based shape optimization on cross-section of monoblock fusion divertor cooling channel for minimizing local heat flux, Fusion Engineering and Design, 2018.

Y. Lv and S. Liu, Topology optimization and heat dissipation performance analysis of a micro-channel heat sink, Meccanica, vol.53, issue.15, pp.3693-3708, 2018.

G. Marck, M. Nemer, and J. L. Harion, Topology optimization of heat and mass transfer problems: laminar flow, Numerical Heat Transfer, vol.63, issue.6, pp.508-539, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00880111

A. Messac, C. Puemi-sukam, and E. Melachrinoudis, Aggregate objective functions and pareto frontiers: required relationships and practical implications, Optimization and Engineering, vol.1, issue.2, pp.171-188, 2000.

A. T. Morrison, Optimization of heat sink fin geometries for heat sinks in natural convection, Thermal Phenomena in Electronic Systems, 1992. I-THERM III, InterSociety Conference on, pp.145-148, 1992.

Z. Nasri, A. H. Laatar, and J. Balti, Natural convection enhancement in an asymmetrically heated channel-chimney system, International Journal of Thermal Sciences, vol.90, pp.122-134, 2015.

C. Othmer, A continuous adjoint formulation for the computation of topological and surface sensitivities of ducted flows, International Journal for Numerical Methods in Fluids, vol.58, issue.8, pp.861-877, 2008.

C. Othmer, Adjoint methods for car aerodynamics, Journal of Mathematics in Industry, vol.4, issue.1, p.6, 2014.

C. Othmer, T. Kaminski, and R. Giering, Computation of topological sensitivities in fluid dynamics: cost function versatility, ECCOMAS CFD 2006: Proceedings of the European Conference on Computational Fluid Dynamics, pp.1-12, 2006.

E. M. Papoutsis-kiachagias and K. C. Giannakoglou, Continuous adjoint methods for turbulent flows, applied to shape and topology optimization: Industrial applications, Archives of Computational Methods in Engineering, vol.23, issue.2, pp.255-299, 2016.

M. Pietropaoli, F. Montomoli, and A. Gaymann, Three-dimensional fluid topology optimization for heat transfer, Structural and Multidisciplinary Optimization pp, vol.1, p.12, 2018.

X. Qian and E. M. Dede, Topology optimization of a coupled thermal-fluid system under a tangential thermal gradient constraint. Structural and Multidisciplinary Optimization, vol.54, pp.531-551, 2016.

X. Qian and E. M. Dede, Topology optimization of a coupled thermal-fluid system under a tangential thermal gradient constraint. Structural and Multidisciplinary Optimization, vol.54, pp.531-551, 2016.

D. Ramalingom, P. H. Cocquet, and A. Bastide, Numerical study of natural convection in asymmetrically heated channel considering thermal stratification and surface radiation, Numerical Heat Transfer, Part A: Applications, vol.72, issue.9, pp.681-696, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01610724

D. Ramalingom, P. H. Cocquet, and A. Bastide, A new interpolation technique to deal with fluidporous media interfaces for topology optimization of heat transfer, Computers & Fluids, vol.168, pp.144-158, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01618684

J. Rokicki, Adjoint lattice boltzmann for topology optimization on multi-gpu architecture, Computers & Mathematics with Applications, vol.71, issue.3, pp.833-848, 2016.

C. Saglietti, P. Schlatter, A. Monokrousos, and D. S. Henningson, Adjoint optimization of natural convection problems: differentially heated cavity. Theoretical and, Computational Fluid Dynamics, vol.31, issue.5-6, pp.537-553, 2017.

C. Saglietti, . Wadbro-e, . Berggren-m, and . Hen-ningson-d, Heat transfer maximization in a three dimensional conductive differentially heated cavity by means of topology optimization, Proceedings of the Seventh European Conference on Computational Fluid Dynamics, 2018.

E. Sanvicente, S. Giroux-julien, C. Ménézo, and H. Bouia, Transitional natural convection flow and heat transfer in an open channel, International Journal of Thermal Sciences, vol.63, pp.87-104, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00777907

O. Sigmund, Morphology-based black and white filters for topology optimization, Structural and Multidisciplinary Optimization, vol.33, issue.4-5, pp.401-424, 2007.

O. Sigmund and K. Maute, Sensitivity filtering from a continuum mechanics perspective, Structural and Multidisciplinary Optimization, vol.46, issue.4, pp.471-475, 2012.

O. Sigmund and K. Maute, Topology optimization approaches, 2013.

D. Talukdar, C. G. Li, and M. Tsubokura, Investigation on optimization of the thermal performance for compressible laminar natural convection flow in open-ended vertical channel, International Journal of Heat and Mass Transfer, vol.128, pp.794-806, 2019.

M. Thebault, S. Giroux-julien, C. Menezo, and V. Timchenko, Natural convective flow analysis in vertical channel, In: ICHMT DIGITAL LIBRARY ONLINE, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02097314

O. Tkachenko, V. Timchenko, S. Giroux-julien, C. Ménézo, G. Yeoh et al., Numerical and experimental investigation of unsteady natural convection in a non-uniformly heated vertical open-ended channel, International Journal of Thermal Sciences, vol.99, pp.9-25, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01478792

Z. X. Tong, M. J. Li, J. J. Yan, and W. Q. Tao, Optimizing thermal conductivity distribution for heat conduction problems with different optimization objectives, International Journal of Heat and Mass Transfer, vol.119, pp.343-354, 2018.

M. Y. Wang, X. Wang, and D. Guo, A level set method for structural topology optimization, Computer methods in applied mechanics and engineering, vol.192, issue.1-2, pp.227-246, 2003.

K. Yaji, T. Yamada, M. Yoshino, T. Matsumoto, K. Izui et al., Topology optimization in thermal-fluid flow using the lattice boltzmann method, Journal of Computational Physics, vol.307, pp.355-377, 2016.

G. H. Yoon, Topological design of heat dissipating structure with forced convective heat transfer, Journal of Mechanical Science and Technology, vol.24, issue.6, pp.1225-1233, 2010.

X. Zhao, M. Zhou, O. Sigmund, and C. S. Andreasen, A poor mans approach to topology optimization of cooling channels based on a darcy flow model, International Journal of Heat and Mass Transfer, vol.116, pp.1108-1123, 2018.

M. Zhou and G. Rozvany, The coc algorithm, part ii: topological, geometrical and generalized shape optimization, Computer Methods in Applied Mechanics and Engineering, vol.89, issue.1-3, pp.309-336, 1991.