Influence of criteria on the determination of forming limits in thickness reduced cruciform specimens - Archive ouverte HAL Access content directly
Conference Papers Year : 2022

Influence of criteria on the determination of forming limits in thickness reduced cruciform specimens

(1) , (1) , (1)
1

Abstract

Biaxial tensile test methods using cruciform specimens have been drawing attention as an effective approach to characterize sheet metal formability. The cruciform specimens usually adopt a thickness reduction at the central area to achieve a relatively large strain gradient for localized necking and fracture investigation. For conventional tests, many criteria have been proposed to determine the forming limits at necking, however, none has been widely accepted and applied to the cruciform specimens with non-uniformed thickness reduction. Therefore, in this work, different existing necking criteria are applied and discussed for numerical procedure in order to define an appropriate necking criterion for the thickness reduced cruciform specimens. AA6061-T4 sheet with a thickness of 2mm is used as a target material. The predicted forming limit curves are compared for different criteria, and the feasibility of each criterion is discussed in detail. Thanks to two dedicated specimens proposed by the authors, forming limits are determined for a wide range of strain states.
Fichier principal
Vignette du fichier
2022-IDDRG2022-Wang et al (Version publiee).pdf (1.49 Mo) Télécharger le fichier
Origin : Publisher files allowed on an open archive

Dates and versions

hal-03789239 , version 1 (27-09-2022)

Identifiers

Cite

Zhihao WANG, Dominique GUINES, L Leotoing. Influence of criteria on the determination of forming limits in thickness reduced cruciform specimens. International Deep-Drawing Research Group Conference (IDDRG 2022), 2022, Lorient, France. ⟨10.1088/1757-899x/1238/1/012051⟩. ⟨hal-03789239⟩
1 View
4 Download

Altmetric

Share

Gmail Facebook Twitter LinkedIn More