Characterization of the Omni-Processor Sewage Sludge Ash for Reuse as Construction Material - Laboratoire de Génie Civil et Génie Mécanique Accéder directement au contenu
Article Dans Une Revue Fluid Dynamic and Material Process Année : 2022

Characterization of the Omni-Processor Sewage Sludge Ash for Reuse as Construction Material

Résumé

Omni Processors (OP) are machines which use sludge as a fuel to generate electricity and clean water, but create ash at the same time. In the present study, fly ash and bottom ash are investigated as materials for potential reuse in the construction field. First, the granular size, density and Blaine finesse are determined. Then, the chemical composition and microstructure are obtained by means of X-ray fluorescence and Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS), respectively. Finally, ashes reactivity is determined by two chemical methods (modified Chapelle test, bound water content R3) and a mechanical method (pozzolanic activity index). The characterization results indicate two material types: fly ash similar to cement and bottom ash similar to fine sand. That's why the mortars mechanical strength with fly ash 0%-30% is better than that with bottom ash at the same rate. Fly ash slightly decreases the mechanical strength of mortars while bottom ash induces a much more significant decrease.
Fichier principal
Vignette du fichier
TSP_FDMP_22165.pdf (2.78 Mo) Télécharger le fichier
Origine : Fichiers éditeurs autorisés sur une archive ouverte

Dates et versions

hal-03773649 , version 1 (09-09-2022)

Licence

Paternité

Identifiants

Citer

Prince Momar Gueye, Siham Kamali-Bernard, Dame Keinde, Fabrice Bernard, Vincent Sambou. Characterization of the Omni-Processor Sewage Sludge Ash for Reuse as Construction Material. Fluid Dynamic and Material Process, 2022, 18 (6), pp.1580-1593. ⟨10.32604/fdmp.2022.022165⟩. ⟨hal-03773649⟩
95 Consultations
30 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More